MAXL INTERNATIONAL GROUP CO.,LTD ZHANGJIAGANG CHANGHONGIMP&EXP CO.,LTD
MAXL INTERNATIONAL GROUP CO.,LTD ZHANGJIAGANG CHANGHONGIMP&EXP CO.,LTD PROFESSIONAL ALUMINIUM PRODUCTS MANUFACTURER,Whatsapp+8613773228028
Add to Cart
Chemical Polishing Aluminium Profiles With Mirror Surface Decorative Material
Material and status:
.
| Material | Status |
| AA6061 | T6 |
| AA6063 | T5 |
Including but not only including the list above.
Chemical Composition:
| Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti | Impurity | Al | |
| Unit | Total | ||||||||||
| 6063 | 02-06 | 0.45-0.9 | <0.35 | <0.1 | <0.1 | <0.1 | <0.1 | <0.1 | <0.05 | <0.15 | Surplus |
| 6061 | 0.4-0.8 | 0.8-1.2 | <0.7 | 0.15-0.4 | <0.15 | <0.25 | 0.04-0.35 | <0.15 | <0.05 | <0.15 | Surplus |
| 6060 | 0.-0.6 | 0.35-0.6 | 0.1-0.3 | ≤0.1 | ≤0.1 | ≤0.15 | ≤0.05 | <0.1 | <0.05 | <0.15 | Surplus |
| 6005 | 0.6-0.9 | 0.4-0.6 | 0.35 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.05 | <0.15 | Surplus |
Technical Data:
| Alloy | Temper | Thickness | Tensile Strength | Yield Strength | Vickers Hardness | Webster Hardness |
| 6005 | T6 | ≤5 | ≥270MP | ≥225MP |
|
|
| T6 | 5<e≤10 | ≥260MP | ≥215MP |
|
| |
| T6 | 10<e≤25 | ≥250MP | ≥200MP |
|
| |
| 6060 | T6 | ≤3 | ≥190MP | ≥150MP |
|
|
| T6 | 3<e≤25 | ≥170MP | ≥140MP |
|
| |
| 6061 | T6 |
| ≥265MP | ≥245MP | HV≥58 | HW≥8 |
| 6063 | T5 |
| ≥160MP | ≥110MP | HV≥58 | HW≥8 |
| T6 |
| ≥205MP | ≥180MP | HV≥58 | HW≥8
|
Descrition:
Chemical Polished Aluminum profile is mainly applied in the top-end furniture such as curtain wall, closet, legs of table and chair, wardrobe, etc. The surface is much smoother than eletrophoresis aluminum profile. It has a mirror finish looking, smooth and shining. Its main market is for USA, European, East-South Asian, South American.
Competitive Advantages:
E.G: The most advanced aluminum rod homogenizing furnaces are adopted to make the aluminum rod more stable.
Automatic digital control anodized production lines with advanced chemical polishing formula make the surface even and less flaw. The quality of the surface is much better than mechanical and manual operation.
More advanced conditions below:
Production Process:
Aluminum ingot -> Aluminum Rod -> Homogeneous processing -> Extrusion->Aging Furnace->Chemical Polishing
Packing process and Loading
Pearl cotton Foam-> Heat shrinkable film-> Kraft
Full loaded, minimized the waste of the container space, optimize the cost of transportation.
A Glance of factory:
Have you met the problems with your supplier below?
Try MAXL, the professional manufacturer of aluminum profiles for South American market, ready to serve you at any time.