Extrusion Powder Coating Aluminium Profiles , 0.6mm-1.2mm Thickness

White Color Powder Coating Aluminium Profiles Extruded Window Frames 0.6mm-1.2mm Thickness / 6 Meters Length

Material and status:

.

Including but not only including the list above.

Descrition:

Powder Coating Aluminum profiles are the most popular material which is mainly applied in doors and windows for South American market, especially in Mexico and Columbia. The quality is much better than mill finished aluminum profile. Its life is much longer and surface is much more smooth and colorful.

It can also be applied in curtain, floor, solar energy, frame of light box, advertising industry, etc.

Aluminum Profile meter weight( kg/m) tolerance

• Wall thickness 1.2 : ±5% kg/m
• Wall thickness 1.0-1.1: ±7%kg/m
• Wall thickness 0.8-0.9: ±8%kg/m
• Wall thickness 0.6-0.7: ±10 %kg/m
• Wall thickness <0.6: ±12%kg/m
• Powder coated thickness: >50μm

Competitive Advantages:

• Cost: The whole production lines are adopted, produces the products begin from aluminum ingot, minimize the cost from every single step.
• Quality: The modern management and advanced equipments create the stable and super quality.
  E.G: The most advanced aluminum rod homogenizing furnaces are adopted to make the aluminum rod more stable.Use spray cooling method which is much better than sink into the water.Vertical full automatic powder coating line with double spraying process make sure the coating thickness is more than 50μm and the powder adhesives on the surface evenly. It is more advanced than horizontal type as well as the quality.
• Service: Any request will be replied within 24 hours, Local office in Mexico, Colombia and Canada, no communication problem, no time difference problem.

You can also get these advanced conditions below:

1. More than 400 types moulds are adopted, can meet almost all kinds of design in South American market.
2. Good Quality Control, CE, ISO certificates approved.
3. Fast Delivery, Only 15 Days which is not easy achieve for other factory in China.
4. Expert export Package, perfect protection, length could reach to 5.995m, full loaded and minimized the waste space of 20GP and 40HQ container.
5. The drilled hole is close to the edge, cost will be saved due to such distance.

Production Process:

First Step: Melting Aluminum ingot into Aluminum Rod.

Second Step: Homogeneous processing could make the material more even.

Third step: Extruding the aluminium rod into profiles by extrusion lines.

Fourth Step:Aging Furnace could make the aluminium profiles with suitable hardness.

Final Step: Powder Coating with different colors, the pure white is the most popular color in the market.

A quick glance for the workshop.

Packing process

EPE Foam-> Heat shrinkable film-> Kraft

Each step ensure the prection would be perfect.

Have you met the problems with your supplier below?

• No suitable mould
• The quantity is too less to produce
• High rate in surface scratching
• Long production time
• Damaged in shipping
• Language problem
• Low efficiency because of time difference

Try MAXL, the expert manufacturer of aluminum profile for South American market, ready to serve you all the time.